How To Fit A Security Chain

How To Fit A Security Chain

Follow our DIY expert Mickey Puckey's advice and learn how to fit a security chain to your door. The same VideoJug method can be used for both a standard and a lockable security chain, so follow these simple steps and fit yours today.

---

Step 1:

You will need…

• 1 security chain kit including screws
• 1 battery drill with drill bits
• 1 chisel
• 1 hammer
• 1 pencil
• 1 pair safety goggles.

---

Step 2:

Height

Choose a height for your security chain and mark this on the door.

---

Step 3:

Slide channel

First you need to attach the slide channel to the door. Select a screw head drill bit and attach it to the drill.

Before you start drilling, remember drill safety. Put on your safety goggles. Make sure that all loose items of clothing, and hair are tucked away. Clear the area of any potential hazards and find a steady standing position.

Align the slide channel with your pencil marks and drill the screws into position.

---

Step 4:

Chain holder

Now use your pencil to mark the position of the slide channel on the door frame. Hold the chain holder over your pencil marks and draw around it. You will need this outline in order to chisel out a recess.

Before you start chiselling, remember chisel safety. Make sure that you are wearing safety goggles and clear the area of potential hazards. Find a steady position and remember to watch your fingers when you do start chiselling.

Make a series of deep cuts along your pencil outline. Remove the wood.

Hold the chain holder in the recess and drill it into place.

---

Step 5:

Test

Check that the security chain works smoothly.